Exso Soldering Stations - Indirect Solution Sdn.Bhd

Exso LedSol 300 Lead Free Soldering Station, Exso EX-936 Temperature Controlled Soldering Station, Exso EX-930 / 930S SMD Rework Station, Exso JY Series Ceramic Soldering Iron


Flux Residue Cleaner, Hi-Grade UC Solvent, Micro Cleaner, SMT Stencil Oven BioCleaner, SMT Stencil Cleaner, Bio Cleaner, Solder Mask Stripper, LF Hi-Grade, No Residue Flux, Halide Free Water Soluble Flux, Low Solids Flux, No Clean Flux, No Residue Flux, Water Soluble Flux, Aqua Flux, Copper Dross Remover, Aqua Wave Solder Oil, Solder wire, Solder Paste, Solder Bar, Rosin Flux, Chemical Deflasher, Soldering and Desoldering Equipments, Industrial Magnifiers and Lighting, Inspection and Stereo Microscope, Dispensing Controller, Electric Screwdriver, Ultrasonic Cleaner, Humidity Cabinet, Assembly Tools, Rework Tools, Hand Tools, Tweezers, Wipers
Indirect Solution Sdn.Bhd.
INDIRECT SOLUTION SDN.BHD.   (950740-K)
Block B, Unit B-3-12
Jalan USJ 19/6
47640 Subang Jaya
Malaysia
Tel  +6016 3227689
Fax +603 80206628
Email:
www.indrct.com
0

Soldering

Exso Soldering Stations




iExso LedSol 300 Lead Free Soldering Station

The heater and the sensor are integrated in the tip (patent no.0037616). Excellent thermal recovery performance using PID control.

LCD with backlight is employed for better visuals. Soldering iron of quick-type is employed for convenient tip change.

Setting temperature is protected by your password.Working time is displayed (1ch). Auto sleepmode and Auto power-off.

Exso LedSol 300 Lead Free Soldering Station

ModelLedSol 300-1LedSol 300-2
Input voltage AC 200V, 60Hz(or 50Hz)AC 200V, 60Hz(or 50Hz)
Heater Output24V AC, 75W 24V AC,75W X2
Power consumption80W 160W
Temperature control 100~500°C(212~932°F) 100~500°C(212~932°F)
Weight2.33kg 2.77kg
Dimensions108.5(W) X 132(H) X 126.5(D) mm 108.5(W) X 132(H) X 126.5(D) mm


iExso EX-936 Temperature Controlled Soldering Station

Easy to handle and many kinds of tips ready for using and change. Ergonomic design for safety and efficiency. Temperature-fixing screw avoiding random temperature change, design apart for easy deployment. Applied heater for prevent generation of heat. ESD (anti-static) design.

Exso EX-936 Temperature Controlled Soldering Station

ModelEX-936
Controlled Temperature 200°C ~ 400°C
Cord3 Wire Rubber Cord
WeightApprox. 1600g
Dimensions150(W)X120(H)X200(D)


iExso EX-930 / 930S SMD Rework Station

Applied protection function for heater when power off. Control air spray is possible. ESD (anti-static) design. Various nozzles for different kinds of IC to be reworked.

Exso EX-930 / 930S SMD Rework Station

 StationBlower
VoltageAC220V/20W AC220V/50W
Pump TypeDiaphragm Pump 
Air Flow23 liters / min.(max) 
Temp. Air Flow 100~420°C
Dimension / Weight187(w)x135(h)x245(d)mm / 4kg196mm / 120g


iExso JY Series Ceramic Soldering Iron

The build in ceramic heater permits high quick soldering with 1-2 minutes of setting. A high insulation factor of over 100Ω constant operation provides the user with high safety. Suitable for accurate soldering such as IC, LSI, MOS-IC due to minimum leakage current.

Exso JY Series Ceramic Soldering Iron

Model No.JY2000JY2100JY2200
Voltage220V220V220V
Power Consumption18W25W40W
Tip Temperature380℃420℃450℃
Insulation Resistance100MΩ100MΩ100MΩ
Total Length185mm185mm185mm
Weight120g210g220g


Indirect Solution Sdn.Bhd. - 47640 Subang Jaya - Malaysia - Tel  +6016 3227689 - email
0
copyright © 2010 - 2020   -   Indirect Solution Sdn.Bhd.
ascl.com

W3 Valid

0
Indirect Solution Sdn.Bhd.   Indirect Solution Sdn.Bhd.