Solder Master Solder Bars Lead Free and Leaded
SOLDERMASTER Bar is designed for maintaining the solder level in automated wave soldering machine
Flux Residue Cleaner, Hi-Grade UC Solvent, Micro Cleaner, SMT Stencil Oven BioCleaner, SMT Stencil Cleaner, Bio Cleaner, Solder Mask Stripper, LF Hi-Grade, No Residue Flux, Halide Free Water Soluble Flux, Low Solids Flux, No Clean Flux, No Residue Flux, Water Soluble Flux, Aqua Flux, Copper Dross Remover, Aqua Wave Solder Oil, Solder wire, Solder Paste, Solder Bar, Rosin Flux, Chemical Deflasher, Soldering and Desoldering Equipments, Industrial Magnifiers and Lighting, Inspection and Stereo Microscope, Dispensing Controller, Electric Screwdriver, Ultrasonic Cleaner, Humidity Cabinet, Assembly Tools, Rework Tools, Hand Tools, Tweezers, Wipers
|
INDIRECT SOLUTION SDN.BHD. (950740-K)
Block B, Unit B-3-12
Jalan USJ 19/6
47640 Subang Jaya
Malaysia
|
Tel +6016 3227689
Fax +603 80206628
Email:
www.indrct.com
|
|
Soldering
|
|
SOLDERMASTER Bars are designed for maintaining the solder level in automated wave soldering machine
 Solder Master Lead Free Solder Bars
| ITEMS | ALLOY | PROPERTIES |
| XE700 | Sn/Ag3.0/Cu0.5 | Highest Reliablity |
| XE700S | Sn/Ag3.0 | Alloy for XE700 to reduce copper % when exceeding 0.9% |
| XE701 | Sn/Ag0.3/Cu0.7 | Low Ag type (low cost) |
| XE701S | Sn/Ag0.3 | Alloy for XE701 to reduce copper % when exceeding 0.9% |
| XE500 | Sn/Cu0.7 | Cost effective but higher temperature & poor solderablity |
| XE500S | Sn/Cu0.2 | Alloy for XE500 to reduce copper % when exceeding 0.9% |
Technical Data
Solder
Alloy | Melting
Solidus/Liquidus | Density
g/cm³ | Electrical
Resistivity
μσm | Thermal
Conductivity
w/m-k | Tensile
Strenght
at break
kgf/cm² | Tensile
Elogation
at break % | Brinell
Hardness
HB |
| XE700 | 217/219 | 7.38 | 0.132 | 58 | 500 | 19 | 15 |
| XE701 | 217/227 | 7.33 | | | 300 | 22 | 14 |
| XE500 | 227 | 7.31 | 0.126 | 66 | 300 | 21 | 9 |
Solder Master Leadead Solder Bars
| ITEMS | ALLOY | PROPERTIES |
| XE300 | Sn63/Pb37 | A standard tin lead solder alloy. |
Technical Data
Solder
Alloy | Melting
Solidus/Liquidus | Density
g/cm³ | Electrical
Resistivity
μσm | Thermal
Conductivity
w/m-k | Tensile
Strenght
at break
kgf/cm² | Tensile
Elogation
at break % | Brinell
Hardness
HB |
| XE300 | 183 | 8.4 | 0.145 | 50 | 525 | 37 | 17 |
Indirect Solution Sdn.Bhd. - 47640 Subang Jaya - Malaysia - Tel +6016 3227689 - email
|
|
copyright © 2010 - 2021 - Indirect Solution Sdn.Bhd.
ascl.com
|
